Bosch 2608596657 165 x 125 x 184 mm HSS-R DIN338 Drill Bits

HSS Metal twist drill bit 9 mm Bosch 2608595075 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 9.5 mm Bosch 2608595076 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 8.8 mm Bosch 2608595074 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 9.1 mm Bosch 2608585515 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 9.3 mm Bosch 2608585517 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 8.7 mm Bosch 2608585513 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit set 25-piece Bosch 2608587018 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Long Pro Drill Bits Bulk Pack (10) 2.5mm OL:100mm WL:65mm

HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing They have a ground flute for maximum accuracy and fast chip removal The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials They ...

HSS Long Pro Drill Bits Bulk Pack (10) 2.0mm OL:85mm WL:55mm

HSS Pro Drill long series drill bits have a body manufactured from high quality HSS steel and have a bright finish The drill bits have precision ground cutting edges which enable fast drilling and ensure perfect finishing They have a ground flute for maximum accuracy and fast chip removal The universal 118º point shape makes the drill bits suitable for drilling a wide selection of materials They ...

HSS Metal twist drill bit set 19-piece Bosch 2608587014 cobalt DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 1000 N/mm², stainless steel V2A/V4A, cast iron, cast steel, acid and heat-resistant steels. Precision drill bits that are resistant to heat and wear. For use in drill stands or in pillar drills. The HSS-Co drill bits are available in two qualities. The Topline drill bits are for the highest requirements and the standard drill ...

HSS Metal twist drill bit 9.5 mm Bosch 2609255082 Total length 125 mm cobalt DIN 338 Cylinder shank 1 pc(s)

Metal drill bits HSS-Co, DIN 338. The expert for hard, tough steel. A precision-ground, right-hand cutting twist drill bit made of high speed steel, ground from solid metal. Safe pilot drilling without pre-punching and high true-running precision make this drill bit stand out. Suitable for alloyed and non-alloyed steel, stainless steel (V2A/V4A) and cast iron. Also available as a set. Only use wit...

HSS Metal twist drill bit 9 mm Bosch 2608585934 Total length 125 mm cut DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 8.9 mm Bosch 2608585514 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Pro TiN Coated Drill Bits (2) 2.0mm OL:49mm WL:24mm

The Irwin HSS Pro titanium drill bits are primarily designed for drilling metal and harder tougher alloys Compared to traditional HSS twist drill bits speed can be increased by 40 -60 and feed by 10 -20 without reducing the life time of the drill bit significantly Ti N is also a poor conductor of heat so the heat generated during the drilling process is diverted into the chips and coolant and less...

HSS Pro TiN Coated Drill Bits (2) 1.5mm OL:40mm WL:18mm

The Irwin HSS Pro titanium drill bits are primarily designed for drilling metal and harder tougher alloys Compared to traditional HSS twist drill bits speed can be increased by 40 -60 and feed by 10 -20 without reducing the life time of the drill bit significantly Ti N is also a poor conductor of heat so the heat generated during the drilling process is diverted into the chips and coolant and less...

HSS Pro TiN Coated Drill Bits (2) 2.5mm OL:57mm WL:30mm

The Irwin HSS Pro titanium drill bits are primarily designed for drilling metal and harder tougher alloys Compared to traditional HSS twist drill bits speed can be increased by 40 -60 and feed by 10 -20 without reducing the life time of the drill bit significantly Ti N is also a poor conductor of heat so the heat generated during the drilling process is diverted into the chips and coolant and less...

HSS Metal twist drill bit 10 mm Bosch 2608596832 Total length 184 mm cut DIN 340 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 10 mm Bosch 2608595690 Total length 184 mm cut DIN 340 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 8 mm Bosch 2608596827 Total length 165 mm cut DIN 340 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 8.5 mm Bosch 2608596828 Total length 165 mm cut DIN 340 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

HSS Metal twist drill bit 9.4 mm Bosch 2608585518 Total length 125 mm cut DIN 338 Cylinder shank 5 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals, hard plastics. Precision-ground HSS-G drill bit enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge. Self-centring split point drill tip means there is no need to...

Bosch 2608596657 165 X 125 X 184 Mm HSS-R DIN338 Drill Bits